CHROMA Type 301 - 4 Piece Knife Set - P-04 Small Chef's Knife, P-06 Bread Knife,  P-09 Paring Knife, P-18 Chef's Knife CHROMA Type 301 P-04 Small Chef's Knife - Indispensable for peeling, chopping and decorating. A must in every kitchen P-04 Small Chef's Knife Indispensable for peeling, chopping and decorating. blade length: 14,2 cm / 5,6" Chroma Type 301 F.A.Porsche - P-06 Bread Knife - Indispensable for bread but also great for crusted roasts, oranges and other foods that requires a serrated blade. P-06 Bread Knife for bread but also great for crusted roasts, oranges and other foods that requires a serrated blade. blade length: 20,9 cm / 8,3" Chroma Type 301 - P-09 Paring Knife 7,7 cm - Little paring knife for peeling and cutting small vegetables. P-09 Paring Knife blade length: 7,7 cm / 3" Blade: Pure 301 Steel CHROMA Type 301 - P-18 Chef's Knife 20 cm - The chef's knife 20 cm is suitable for all-round tasks in the kitchen. Ideal for cleaning, cutting and chopping cabbage, vegetables and herbs. P-18 Chef's Knife blade length: 20 cm / 7,8" Blade: Pure 301 Steel Cut: V-Cut Hardness: 59-60° HRC Handle: 18/10 stainless steel The handle of the CHROMA Type 301 - Design by F.A. Porsche is constructed of stainless steel, and the blade is made of high-quality Japanese 301 steel. The blade of each knife is carefully razorsharp sharpened by the hand of a master. The advantages Type 301 are: An ergonomic handle - designed by F.A. Porsche working with the chef of the decade, Jörg Wörther A metal "pearl" that clearly demarcates the end of the handle, for better control when cutting A seamless perfection and hygienic transition from blade to handle A special grinding method is used, so the knife stays sharp longer and is easier to sharpen That it is beloved by famous gourmet chefs The out of the box sharpness is one of the best in the industry Please note the following instructions to insure the knife remains in optimal condition for years to come: Never place the knife in the dishwasher. Hand wash and dry after every use. Regularly sharpen the knife using the original Type 301 whetstone. Under no circumstances should a sharpening steel be used, as it will damage the blade. Store the knife in a safe, secure manner, for example, in a knife block so the blade is not left exposed. Only use wooden or plastic cutting boards, never marble or glass when cutting with a Type 301. Only use the knife to prepare food. Do not use it to cut frozen foods, bones, or as a utility knife. Ideally, the knife should be sharpened daily (for professional cooks) or about every six months (for hobby cooks), and by the same person each time. Each person has an individual angle at which he or she sharpens the knife. The blade of the knife becomes sharper each time it is sharpened in the same manner, by the same person. Read the instructions included with your whetstone carefully. Sharpening with a 301 whetstone is so simple that even beginners can quickly master the technique required. Knives with a serrated blade, such as the bread and tomato knives, should only be sharpened by a certified professional. We wish you much success and joy with you new knife.  

CHROMA type 301 - P-29 Knifeset - Set of 2 - P-02 Santoku knife - P-05 Carving knife and P-09 Paring knife - In high-quality gift packaging 1 x P-2 Sandoku - Japanese classic: designed for cutting and slicing vegetables blade length: 17,8 cm / 7" 1 x P-09 Paring Knife 7,7 cm - Little paring knife for peeling and cutting small vegetables. blade length: 7,7 cm / 3" Blade: Pure 301 Steel Cut: V-Cut Hardness: 59-60° HRC Handle: 18/10 stainless steel Cutting with the award winner The professionell results of the CHROMA type 301 range are officially confirmed by the Swedish Testinstitute Test Fakta, comparable to like the German Stiftung Warentest. The institute nominated 2011 the Chef Cnife P-18 clearly as the winner of the test. Especially in the catagories keeping of cutting, sharpness and resistance to rust the cnife convinced the experts. Furthermore the initiative LifeCare granted the type 301 cnives 2012 with the Kitchen-Innovation of the year award. Also the design received a lot of design-awards, amongst others the iF Design Award 2005. The handle of the CHROMA type 301 - Design by F.A. Porsche is constructed of stainless steel, and the blade is made of high-quality Japanese 301 steel. The blade of each knife is carefully razorsharp sharpened by the hand of a master. The advantages Type 301 are: An ergonomic handle - designed by F.A. Porsche working with the chef of the decade, Jörg Wörther A metal "pearl" that clearly demarcates the end of the handle, for better control when cutting A seamless perfection and hygienic transition from blade to handle A special grinding method is used, so the knife stays sharp longer and is easier to sharpen That it is beloved by famous gourmet chefs The out of the box sharpness is one of the best in the industry Please note the following instructions to insure the knife remains in optimal condition for years to come: Never place the knife in the dishwasher. Hand wash and dry after every use. Regularly sharpen the knife using the original Type 301 whetstone. Under no circumstances should a sharpening steel be used, as it will damage the blade. Store the knife in a safe, secure manner, for example, in a knife block so the blade is not left exposed. Only use wooden or plastic cutting boards, never marble or glass when cutting with a Type 301. Only use the knife to prepare food. Do not use it to cut frozen foods, bones, or as a utility knife. Ideally, the knife should be sharpened daily (for professional cooks) or about every six months (for hobby cooks), and by the same person each time. Each person has an individual angle at which he or she sharpens the knife. The blade of the knife becomes sharper each time it is sharpened in the same manner, by the same person. Read the instructions included with your whetstone carefully. Sharpening with a 301 whetstone is so simple that even beginners can quickly master the technique required. Knives with a serrated blade, such as the bread and tomato knives, should only be sharpened by a certified professional. We wish you much success and joy with you new knife. Initially soak the stone in water for 15 minutes. During sharpening, always keep the stone wet, you can sprinkle it with some water if you think it is drying out. The water works like a lubricant on the stone. The knife should be held at a 10-20° angle to the whetstone. Then the knife is drawn off on the stone, in other words drawn back and forth with light pressure. During the grinding operation a sludge forms which assists the grinding of the edge. Knife blades with a single edge are sharpened on the right side to 80% and on left to 20%, whereas knives with edges on both sides are sharpened knives to 70% on the right and to 30% on the left. After sharpenimg the knife should be cleaned well with lukewarm water and SHARPENING & POLISHING INSTRUCTIONS for CHROMA READY-TO-USE-Whetstones ST-IS1, ST-IS2 UND ST-IS3 Pour a sufficient amount of water on the whetstone to moisten the surface. You can immediately begin with polishing. The right-hander starts polishing the right side of the knife - facing the point of the knife away from the body. Left-handers start with the left side of the blade. Please hold the knife securely. Draw the blade back and forth in an angle as shown in the illustration. It is best to start polishing with the point of the knife continuing with the middle and the lower part of the blade. Once you detect an edge at the opposite side to the one you are polishing, proceed with the next part to be polished. Moisten the stone if necessary. The abrasive slurry which forms on the stone is very important to the polishing process and should be removed only after polishing. Repeat this process on the other side of the blade. This side requires less effort. Once the burr is removed the polishing is complete. The knife should be cleaned with lukewarm water and dried with a soft dishcloth. The whetstone should be rinsed with water and be dried afterwards. TIPS FOR VALUE PRESERVATION OF YOUR JAPANESE COOKING KNIVES Never letthe knife get completely blunt. Sharpen it regularly with a high grade CHROMA whetstone. Like every good knife, a Japanese cooking knife never belongs in the dishwasher, because the aggressive salts attack the steel as surface rust. Also do not leave any knives in a wet  sink.  After every use you should clean your knife with lukewarm water and dry it afterwards. Our knives are made of special steel and have the typical "V" JAPAN- GRINDING. This makes our knives sharper than all common kitchen knives. CHROMA knives remain sharp also longer than MANY others.

CHROMA type 301 - P-517 Carving Set - Set of 2 - This giftset consitst of carving knife P-5 and carving fork, straight P-17 deliverd in a beautiful wooden MDF box. 1 x P-05 Carving Knife 19,3 cm - Indispensable for peeling, chopping and decorating. A must in every kitchen blade length: 19,3 cm / 7,7" 1 x P-17 carving fork 7,7 cm - The Carving fork is ideal for carving roasts. blade length: 19 cm / 3" Blade: Pure 301 Steel Hardness: 59-60° HRC Handle: 18/10 stainless steel Cutting with the award winner The professionell results of the CHROMA type 301 range are officially confirmed by the Swedish Testinstitute Test Fakta, comparable to like the German Stiftung Warentest. The institute nominated 2011 the Chef Cnife P-18 clearly as the winner of the test. Especially in the catagories keeping of cutting, sharpness and resistance to rust the cnife convinced the experts. Furthermore the initiative LifeCare granted the type 301 cnives 2012 with the Kitchen-Innovation of the year award. Also the design received a lot of design-awards, amongst others the iF Design Award 2005. The handle of the CHROMA type 301 - Design by F.A. Porsche is constructed of stainless steel, and the blade is made of high-quality Japanese 301 steel. The blade of each knife is carefully razorsharp sharpened by the hand of a master. The advantages Type 301 are: An ergonomic handle - designed by F.A. Porsche working with the chef of the decade, Jörg Wörther A metal "pearl" that clearly demarcates the end of the handle, for better control when cutting A seamless perfection and hygienic transition from blade to handle A special grinding method is used, so the knife stays sharp longer and is easier to sharpen That it is beloved by famous gourmet chefs The out of the box sharpness is one of the best in the industry Please note the following instructions to insure the knife remains in optimal condition for years to come: Never place the knife in the dishwasher. Hand wash and dry after every use. Regularly sharpen the knife using the original Type 301 whetstone. Under no circumstances should a sharpening steel be used, as it will damage the blade. Store the knife in a safe, secure manner, for example, in a knife block so the blade is not left exposed. Only use wooden or plastic cutting boards, never marble or glass when cutting with a Type 301. Only use the knife to prepare food. Do not use it to cut frozen foods, bones, or as a utility knife. Ideally, the knife should be sharpened daily (for professional cooks) or about every six months (for hobby cooks), and by the same person each time. Each person has an individual angle at which he or she sharpens the knife. The blade of the knife becomes sharper each time it is sharpened in the same manner, by the same person. Read the instructions included with your whetstone carefully. Sharpening with a 301 whetstone is so simple that even beginners can quickly master the technique required. Knives with a serrated blade, such as the bread and tomato knives, should only be sharpened by a certified professional. We wish you much success and joy with you new knife. Initially soak the stone in water for 15 minutes. During sharpening, always keep the stone wet, you can sprinkle it with some water if you think it is drying out. The water works like a lubricant on the stone. The knife should be held at a 10-20° angle to the whetstone. Then the knife is drawn off on the stone, in other words drawn back and forth with light pressure. During the grinding operation a sludge forms which assists the grinding of the edge. Knife blades with a single edge are sharpened on the right side to 80% and on left to 20%, whereas knives with edges on both sides are sharpened knives to 70% on the right and to 30% on the left. After sharpenimg the knife should be cleaned well with lukewarm water and SHARPENING & POLISHING INSTRUCTIONS for CHROMA READY-TO-USE-Whetstones ST-IS1, ST-IS2 UND ST-IS3 Pour a sufficient amount of water on the whetstone to moisten the surface. You can immediately begin with polishing. The right-hander starts polishing the right side of the knife - facing the point of the knife away from the body. Left-handers start with the left side of the blade. Please hold the knife securely. Draw the blade back and forth in an angle as shown in the illustration. It is best to start polishing with the point of the knife continuing with the middle and the lower part of the blade. Once you detect an edge at the opposite side to the one you are polishing, proceed with the next part to be polished. Moisten the stone if necessary. The abrasive slurry which forms on the stone is very important to the polishing process and should be removed only after polishing. Repeat this process on the other side of the blade. This side requires less effort. Once the burr is removed the polishing is complete. The knife should be cleaned with lukewarm water and dried with a soft dishcloth. The whetstone should be rinsed with water and be dried afterwards. TIPS FOR VALUE PRESERVATION OF YOUR JAPANESE COOKING KNIVES Never letthe knife get completely blunt. Sharpen it regularly with a high grade CHROMA whetstone. Like every good knife, a Japanese cooking knife never belongs in the dishwasher, because the aggressive salts attack the steel as surface rust. Also do not leave any knives in a wet  sink.  After every use you should clean your knife with lukewarm water and dry it afterwards. Our knives are made of special steel and have the typical "V" JAPAN- GRINDING. This makes our knives sharper than all common kitchen knives. CHROMA knives remain sharp also longer than MANY others.

CHROMA type 301 - P-529 Knifeset - Set of 3 - P-02 Santoku knife - P-05 Carving knife and P-09 Paring knife - In high-quality gift packaging 1 x P-2 Sandoku - Japanese classic: designed for cutting and slicing vegetables blade length: 17,8 cm / 7" 1 x P-05 Carving Knife 19,3 cm - Indispensable for peeling, chopping and decorating. A must in every kitchen blade length: 17,8 cm / 7" 1 x P-09 Paring Knife 7,7 cm - Little paring knife for peeling and cutting small vegetables. blade length: 7,7 cm / 3" Blade: Pure 301 Steel Cut: V-Cut Hardness: 59-60° HRC Handle: 18/10 stainless steel Cutting with the award winner The professionell results of the CHROMA type 301 range are officially confirmed by the Swedish Testinstitute Test Fakta, comparable to like the German Stiftung Warentest. The institute nominated 2011 the Chef Cnife P-18 clearly as the winner of the test. Especially in the catagories keeping of cutting, sharpness and resistance to rust the cnife convinced the experts. Furthermore the initiative LifeCare granted the type 301 cnives 2012 with the Kitchen-Innovation of the year award. Also the design received a lot of design-awards, amongst others the iF Design Award 2005. The handle of the CHROMA type 301 - Design by F.A. Porsche is constructed of stainless steel, and the blade is made of high-quality Japanese 301 steel. The blade of each knife is carefully razorsharp sharpened by the hand of a master. The advantages Type 301 are: An ergonomic handle - designed by F.A. Porsche working with the chef of the decade, Jörg Wörther A metal "pearl" that clearly demarcates the end of the handle, for better control when cutting A seamless perfection and hygienic transition from blade to handle A special grinding method is used, so the knife stays sharp longer and is easier to sharpen That it is beloved by famous gourmet chefs The out of the box sharpness is one of the best in the industry Please note the following instructions to insure the knife remains in optimal condition for years to come: Never place the knife in the dishwasher. Hand wash and dry after every use. Regularly sharpen the knife using the original Type 301 whetstone. Under no circumstances should a sharpening steel be used, as it will damage the blade. Store the knife in a safe, secure manner, for example, in a knife block so the blade is not left exposed. Only use wooden or plastic cutting boards, never marble or glass when cutting with a Type 301. Only use the knife to prepare food. Do not use it to cut frozen foods, bones, or as a utility knife. Ideally, the knife should be sharpened daily (for professional cooks) or about every six months (for hobby cooks), and by the same person each time. Each person has an individual angle at which he or she sharpens the knife. The blade of the knife becomes sharper each time it is sharpened in the same manner, by the same person. Read the instructions included with your whetstone carefully. Sharpening with a 301 whetstone is so simple that even beginners can quickly master the technique required. Knives with a serrated blade, such as the bread and tomato knives, should only be sharpened by a certified professional. We wish you much success and joy with you new knife. Initially soak the stone in water for 15 minutes. During sharpening, always keep the stone wet, you can sprinkle it with some water if you think it is drying out. The water works like a lubricant on the stone. The knife should be held at a 10-20° angle to the whetstone. Then the knife is drawn off on the stone, in other words drawn back and forth with light pressure. During the grinding operation a sludge forms which assists the grinding of the edge. Knife blades with a single edge are sharpened on the right side to 80% and on left to 20%, whereas knives with edges on both sides are sharpened knives to 70% on the right and to 30% on the left. After sharpenimg the knife should be cleaned well with lukewarm water and SHARPENING & POLISHING INSTRUCTIONS for CHROMA READY-TO-USE-Whetstones ST-IS1, ST-IS2 UND ST-IS3 Pour a sufficient amount of water on the whetstone to moisten the surface. You can immediately begin with polishing. The right-hander starts polishing the right side of the knife - facing the point of the knife away from the body. Left-handers start with the left side of the blade. Please hold the knife securely. Draw the blade back and forth in an angle as shown in the illustration. It is best to start polishing with the point of the knife continuing with the middle and the lower part of the blade. Once you detect an edge at the opposite side to the one you are polishing, proceed with the next part to be polished. Moisten the stone if necessary. The abrasive slurry which forms on the stone is very important to the polishing process and should be removed only after polishing. Repeat this process on the other side of the blade. This side requires less effort. Once the burr is removed the polishing is complete. The knife should be cleaned with lukewarm water and dried with a soft dishcloth. The whetstone should be rinsed with water and be dried afterwards. TIPS FOR VALUE PRESERVATION OF YOUR JAPANESE COOKING KNIVES Never letthe knife get completely blunt. Sharpen it regularly with a high grade CHROMA whetstone. Like every good knife, a Japanese cooking knife never belongs in the dishwasher, because the aggressive salts attack the steel as surface rust. Also do not leave any knives in a wet  sink.  After every use you should clean your knife with lukewarm water and dry it afterwards. Our knives are made of special steel and have the typical "V" JAPAN- GRINDING. This makes our knives sharper than all common kitchen knives. CHROMA knives remain sharp also longer than MANY others.

CHROMA type 301 - P-529 Knifeset - Set of 3 - P-02HM Santoku knife - P-05HM Carving knife and P-09HM Paring knife - In high-quality gift packaging 1 x P-2HM Sandoku - Japanese classic: designed for cutting and slicing vegetables blade length: 17,8 cm / 7" 1 x P-05HM Carving Knife 19,3 cm - Indispensable for peeling, chopping and decorating. A must in every kitchen blade length: 17,8 cm / 7" 1 x P-09HM Paring Knife 7,7 cm - Little paring knife for peeling and cutting small vegetables. blade length: 7,7 cm / 3" Blade: Pure 301 Steel Cut: V-Cut Hardness: 59-60° HRC Handle: 18/10 stainless steel The most important advantages for professional chefs is the ergonomic handle and the extreme sharpness. The cnife is incredibly comfortable and safe in your hand. Based on a centuries old blacksmith technique, CHROMA introduces a new series of the very popular type 301 cnives with a classic, hammered style to the market. In addition to the extraordinary look of the cnife, its non-stick nature is a major advantage of the hammered technique. Particularly in comparison to conventional blades, this feature is clearly noticeable. Because of the hammered dots a small air cushion remains between the blade and the food you cut. The food easily falls away from the blade. The CHROMA type 301, Design by F.A. Porsche, cnives are popular with many Michelin star chefs. CHROMA type 301 F.A.Porsche The handle of the CHROMA type 301 - Design by F.A. Porsche is constructed of stainless steel, and the blade is made of high-quality Japanese 301 steel. The blade of each knife is carefully razorsharp sharpened by the hand of a master. The advantages Type 301 are: An ergonomic handle - designed by F.A. Porsche working with the chef of the decade, Jörg Wörther A metal "pearl" that clearly demarcates the end of the handle, for better control when cutting A seamless perfection and hygienic transition from blade to handle A special grinding method is used, so the knife stays sharp longer and is easier to sharpen That it is beloved by famous gourmet chefs The out of the box sharpness is one of the best in the industry Please note the following instructions to insure the knife remains in optimal condition for years to come: Never place the knife in the dishwasher. Hand wash and dry after every use. Regularly sharpen the knife using the original Type 301 whetstone. Under no circumstances should a sharpening steel be used, as it will damage the blade. Store the knife in a safe, secure manner, for example, in a knife block so the blade is not left exposed. Only use wooden or plastic cutting boards, never marble or glass when cutting with a Type 301. Only use the knife to prepare food. Do not use it to cut frozen foods, bones, or as a utility knife. Ideally, the knife should be sharpened daily (for professional cooks) or about every six months (for hobby cooks), and by the same person each time. Each person has an individual angle at which he or she sharpens the knife. The blade of the knife becomes sharper each time it is sharpened in the same manner, by the same person. Read the instructions included with your whetstone carefully. Sharpening with a 301 whetstone is so simple that even beginners can quickly master the technique required. Knives with a serrated blade, such as the bread and tomato knives, should only be sharpened by a certified professional. We wish you much success and joy with you new knife.

CHROMA type 301 - P-18 chef's knife 20 cm - The chef's knife 20 cm is suitable for all all-round tasks in the kitchen. It is ideal for cleaning, cutting and chopping cabbage, vegetables and herbs.  The P-18 chef's knife 20 cm is the declared favorite knife of the best German chef, Harald Wohlfahrt (according to DER FEINSCHMECKER 10/07) - test winner of the knife test TESTFAKTA.se (3/2011) P-18 chef's knife Blade length: 20 cm Blade material: Pure 301 Steel Hardness: 59-60° HRC Grinding: V-grinding Handle material: 18/10 Stainless Steel CHROMA type 301 P-09 small paring knife blade length: 7,7 cm Indispensable for peeling, cutting and decorating. With the short blade it is particularly handy and versatile. Cutting with the award winner The professionell results of the CHROMA type 301 range are officially confirmed by the Swedish Testinstitute Test Fakta, comparable to like the German Stiftung Warentest. The institute nominated 2011 the Chef Cnife P-18 clearly as the winner of the test. Especially in the catagories keeping of cutting, sharpness and resistance to rust the cnife convinced the experts. Furthermore the initiative LifeCare granted the type 301 cnives 2012 with the Kitchen-Innovation of the year award. Also the design received a lot of design-awards, amongst others the iF Design Award 2005. The handle of the CHROMA type 301 - Design by F.A. Porsche is constructed of stainless steel, and the blade is made of high-quality Japanese 301 steel. The blade of each knife is carefully razorsharp sharpened by the hand of a master. The advantages Type 301 are: An ergonomic handle - designed by F.A. Porsche working with the chef of the decade, Jörg Wörther A metal "pearl" that clearly demarcates the end of the handle, for better control when cutting A seamless perfection and hygienic transition from blade to handle A special grinding method is used, so the knife stays sharp longer and is easier to sharpen That it is beloved by famous gourmet chefs The out of the box sharpness is one of the best in the industry Please note the following instructions to insure the knife remains in optimal condition for years to come: Never place the knife in the dishwasher. Hand wash and dry after every use. Regularly sharpen the knife using the original Type 301 whetstone. Under no circumstances should a sharpening steel be used, as it will damage the blade. Store the knife in a safe, secure manner, for example, in a knife block so the blade is not left exposed. Only use wooden or plastic cutting boards, never marble or glass when cutting with a Type 301. Only use the knife to prepare food. Do not use it to cut frozen foods, bones, or as a utility knife. Ideally, the knife should be sharpened daily (for professional cooks) or about every six months (for hobby cooks), and by the same person each time. Each person has an individual angle at which he or she sharpens the knife. The blade of the knife becomes sharper each time it is sharpened in the same manner, by the same person. Read the instructions included with your whetstone carefully. Sharpening with a 301 whetstone is so simple that even beginners can quickly master the technique required. Knives with a serrated blade, such as the bread and tomato knives, should only be sharpened by a certified professional. We wish you much success and joy with you new knife. Initially soak the stone in water for 15 minutes. During sharpening, always keep the stone wet, you can sprinkle it with some water if you think it is drying out. The water works like a lubricant on the stone. The knife should be held at a 10-20° angle to the whetstone. Then the knife is drawn off on the stone, in other words drawn back and forth with light pressure. During the grinding operation a sludge forms which assists the grinding of the edge. Knife blades with a single edge are sharpened on the right side to 80% and on left to 20%, whereas knives with edges on both sides are sharpened knives to 70% on the right and to 30% on the left. After sharpenimg the knife should be cleaned well with lukewarm water and SHARPENING & POLISHING INSTRUCTIONS for CHROMA READY-TO-USE-Whetstones ST-IS1, ST-IS2 UND ST-IS3 Pour a sufficient amount of water on the whetstone to moisten the surface. You can immediately begin with polishing. The right-hander starts polishing the right side of the knife - facing the point of the knife away from the body. Left-handers start with the left side of the blade. Please hold the knife securely. Draw the blade back and forth in an angle as shown in the illustration. It is best to start polishing with the point of the knife continuing with the middle and the lower part of the blade. Once you detect an edge at the opposite side to the one you are polishing, proceed with the next part to be polished. Moisten the stone if necessary. The abrasive slurry which forms on the stone is very important to the polishing process and should be removed only after polishing. Repeat this process on the other side of the blade. This side requires less effort. Once the burr is removed the polishing is complete. The knife should be cleaned with lukewarm water and dried with a soft dishcloth. The whetstone should be rinsed with water and be dried afterwards. TIPS FOR VALUE PRESERVATION OF YOUR JAPANESE COOKING KNIVES Never letthe knife get completely blunt. Sharpen it regularly with a high grade CHROMA whetstone. Like every good knife, a Japanese cooking knife never belongs in the dishwasher, because the aggressive salts attack the steel as surface rust. Also do not leave any knives in a wet  sink.  After every use you should clean your knife with lukewarm water and dry it afterwards. Our knives are made of special steel and have the typical "V" JAPAN- GRINDING. This makes our knives sharper than all common kitchen knives. CHROMA knives remain sharp also longer than MANY others.

The knife set consists of the size. Chef's knife and the paring knife from Culinaris Gr. Chef's knife 20 cm The large chef's knife from Culinaris is a universal tool in the kitchen. It is used for cutting meat, fish and vegetables. Finer work, like dicing onions, is done with the tip. With the long blade, meat can be cut cleanly in just a few strokes. The chef's knife is the chef's most important tool and is the most commonly used. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging Total length: 33.5 cm Blade length: 20.0 cm Peeling knife 10 cm The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). It is suitable for cutting onions and herbs and is also very helpful for chopping, cleaning and decorating fruit and vegetables. With its tapered blade it can also be used for spiking. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging Total length: 21.0 cm Blade length: 10.0 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box.

The four-piece knife set + magnetic knife bar consists of: Large chef's knife The large chef's knife from Culinaris is a universal tool in the kitchen. It is used for cutting meat, fish and vegetables. Finer work, like dicing onions, is done with the tip. With the long blade, meat can be cut cleanly in just a few strokes. The chef's knife is the chef's most important tool and is the most commonly used. Total length: 33.5 cm Blade length: 20.0 cm paring knife The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). It is suitable for cutting onions and herbs and is also very helpful for chopping, cleaning and decorating fruit and vegetables. With its tapered blade it can also be used for spiking. Total length: 21.0 cm Blade length: 10.0 cm Nakiri The Nakiri is a Japanese vegetable knife with extreme versatility. It is ideal for cutting, dicing and chopping vegetables, herbs and fruit. Although similar in shape to a cleaver, it should not be confused with it as it is not suitable for rough work such as cutting bones. The very sharp and finely ground blade helps to process vegetables, herbs and fruit very quickly but also very delicately. Total length: 30.0 cm Blade length: 17.0 cm Bread knife The classic knife that no kitchen should be without. In addition to bread, the knife is also suitable for hard-shelled vegetables and fruit as well as for roasts, e.g. crusty roast. The serrated edge of the knife works like the teeth of a saw, only much finer. All kinds of bread can be cut without pressure. Even with a hard crust, a clean cut image is created. Total length: 38.0 cm Blade length: 25.0 cm Magnetic knife bar The magnetic strip from Culinaris made of robust walnut wood guarantees safe and space-saving storage of your knives thanks to extra-strong magnets. The wood grain creates a homely ambience. The required mounting material is included. Total length: 40 cm Material: Walnut wood Incl. Screws, dowels and adhesive strips The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging

The four-piece knife set consists of: Large Chef's Knife The large chef's knife from Culinaris is a universal tool in the kitchen. It is used for cutting meat, fish and vegetables. Finer work, like dicing onions, is done with the tip. With the long blade, meat can be cut cleanly in just a few strokes. The chef's knife is the chef's most important tool and is the most commonly used. Total length: 33.5 cm Blade length: 20.0 cm Paring Knife The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). It is suitable for cutting onions and herbs and is also very helpful for chopping, cleaning and decorating fruit and vegetables. With its tapered blade it can also be used for spiking. Total length: 21.0 cm Blade length: 10.0 cm Bread Knife Whether hard or soft crust, rolls or baguette: with the bread knife from Culinaris you can cut all types of bread. The serrated edge means it cuts through the hard crust without crushing the soft interior of the bread. Did you know that you can also cut cakes and tarts with a bread knife? These knives are even suitable for cutting hard fruits and vegetables such as melon, pumpkin or celeriac. Total length: 38.0 cm Blade length: 25.0 cm Small Santoku What the chef's knife is for European kitchens, the Santoku is in Japan and all of Asia. Thanks to its versatile shape, weight and cut, it can be used for weighing and chopping herbs, vegetables and fruit as well as for preparing fish and meat. The sharp blade of the Santoku can be used to make fine to wafer-thin cuts, which is why it is indispensable in kitchens worldwide. Total length: 38.0 cm Blade length: 25.0 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging

The four-piece knife set consists of: Large chef's knife The large chef's knife from Culinaris is a universal tool in the kitchen. It is used for cutting meat, fish and vegetables. Finer work, like dicing onions, is done with the tip. With the long blade, meat can be cut cleanly in just a few strokes. The chef's knife is the chef's most important tool and is the most commonly used. Total length: 33.5 cm Blade length: 20.0 cm paring knife The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). It is suitable for cutting onions and herbs and is also very helpful for chopping, cleaning and decorating fruit and vegetables. With its tapered blade it can also be used for spiking. Total length: 21.0 cm Blade length: 10.0 cm Boning knife The boning knife from Culinaris is perfect due to its sturdy workmanship and the maneuverable, very pointed blade to remove bones or skin meat and poultry. It also allows for easy removal of tendons and fat. The boning knife is therefore the best companion when preparing meat. Total length: 28.0 cm Blade length: 16.0 cm Acacia knife block Simple knife storage is a thing of the past. Now we stylishly present the elegant magnetic knife block from Culinaris, which glamorously showcases your knives thanks to the built-in magnet. Serves for the safe storage of up to 5 knives with a blade length of up to 21 cm. Magnetic knife block for up to 5 knives Area for knives 29.0 x 21.0 cm Material: Acacia Dimensions: 22.8 x 30.6 x 10.5 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging

The four-piece knife set consists of: Large Chef's Knife The large chef's knife from Culinaris is a universal tool in the kitchen. It is used for cutting meat, fish and vegetables. Finer work, like dicing onions, is done with the tip. With the long blade, meat can be cut cleanly in just a few strokes. The chef's knife is the chef's most important tool and is the most commonly used. Total length: 33.5 cm Blade length: 20.0 cm Paring Knife The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). It is suitable for cutting onions and herbs and is also very helpful for chopping, cleaning and decorating fruit and vegetables. With its tapered blade it can also be used for spiking. Total length: 21.0 cm Blade length: 10.0 cm Small Santoku What the chef's knife is for European kitchens, the Santoku is in Japan and all of Asia. Thanks to its versatile shape, weight and cut, it can be used for weighing and chopping herbs, vegetables and fruit as well as for preparing fish and meat. The sharp blade of the Santoku can be used to make fine to wafer-thin cuts, which is why it is indispensable in kitchens worldwide. Total length: 38.0 cm Blade length: 25.0 cm Magnetic Knife Block Simple knife storage is a thing of the past. Now we stylishly present the elegant magnetic knife block from Culinaris, which glamorously showcases your knives thanks to the built-in magnet. Used to safely store up to 5 knives with a blade length of up to 21 cm. Magnetic knife block for up to 5 knives Area for knives 29.0 x 21.0 cm Material: Acacia Dimensions: 22.8 x 30.6 x 10.5 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging

The four-piece knife set consists of: Large chef's knife The large chef's knife from Culinaris is a universal tool in the kitchen. It is used for cutting meat, fish and vegetables. Finer work, like dicing onions, is done with the tip. With the long blade, meat can be cut cleanly in just a few strokes. The chef's knife is the chef's most important tool and is the most commonly used. Total length: 33.5 cm Blade length: 20.0 cm paring knife The all-purpose knife from Culinaris is an all-round talent that is used for many small tasks in the kitchen. The knife is ideal for processing fruit and vegetables, but meat and fish are also no problem. Total length: 24.5 cm Blade length: 12.5 cm Boning knife The boning knife from Culinaris is perfect due to its sturdy workmanship and the maneuverable, very pointed blade to remove bones or skin meat and poultry. It also allows for easy removal of tendons and fat. The boning knife is therefore the best companion when preparing meat. Total length: 28.0 cm Blade length: 16.0 cm Meat fork The meat fork from Culinaris is a useful partner for all meat lovers. It can be used to easily turn the food or cut up the roast. The long tines made of stainless steel easily penetrate the meat and prevent bleeding. The triple-riveted, black hard resin handle sits securely in the hand. Material: 430 stainless steel / hard resin (Black G10) Total length: 32.0 cm Fork length: 19.0 cm Acacia knife block Simple knife storage is a thing of the past. Now we stylishly present the elegant magnetic knife block from Culinaris, which glamorously showcases your knives thanks to the built-in magnet. Serves for the safe storage of up to 5 knives with a blade length of up to 21 cm. Magnetic knife block for up to 5 knives Area for knives 29.0 x 21.0 cm Material: Acacia Dimensions: 22.8 x 30.6 x 10.5 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging

Knife set consisting of the size. Santoku and the paring knife Santoku What the chef's knife is for European kitchens, the Santoku is in Japan and all of Asia. Thanks to its versatile shape, weight and cut, it can be used for weighing and chopping herbs, vegetables and fruit as well as for preparing fish and meat. The sharp blade of the Santoku can be used to make fine to wafer-thin cuts, which is why it is indispensable in kitchens worldwide. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging Total length: 31.0 cm Blade length: 18.0 cm paring knife The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging Total length: 21.0 cm Blade length: 10.0 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box.

The four-piece knife set consists of: Great Santoku What the chef's knife is for European kitchens, the Santoku is in Japan and all of Asia. Thanks to its versatile shape, weight and cut, it can be used for weighing and chopping herbs, vegetables and fruit as well as for preparing fish and meat. The sharp blade of the Santoku can be used to make fine to wafer-thin cuts, which is why it is indispensable in kitchens worldwide. Total length: 31.0 cm Blade length: 18.0 cm paring knife The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). It is suitable for cutting onions and herbs and is also very helpful for chopping, cleaning and decorating fruit and vegetables. With its tapered blade it can also be used for spiking. Total length: 21.0 cm Blade length: 10.0 cm Boning knife The boning knife from Culinaris is perfect due to its sturdy workmanship and the maneuverable, very pointed blade to remove bones or skin meat and poultry. It also allows for easy removal of tendons and fat. The boning knife is therefore the best companion when preparing meat. Total length: 28.0 cm Blade length: 16.0 cm Acacia knife block Simple knife storage is a thing of the past. Now we stylishly present the elegant magnetic knife block from Culinaris, which glamorously showcases your knives thanks to the built-in magnet. Serves for the safe storage of up to 5 knives with a blade length of up to 21 cm. Magnetic knife block for up to 5 knives Area for knives 29.0 x 21.0 cm Material: Acacia Dimensions: 22.8 x 30.6 x 10.5 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging

The three-piece knife set consists of: Great Santoku What the chef's knife is for European kitchens, the Santoku is in Japan and all of Asia. Thanks to its versatile shape, weight and cut, it can be used for weighing and chopping herbs, vegetables and fruit as well as for preparing fish and meat. The sharp blade of the Santoku can be used to make fine to wafer-thin cuts, which is why it is indispensable in kitchens worldwide. Total length: 31.0 cm Blade length: 18.0 cm paring knife The Culinaris paring knife with a blade length of 10 cm is a small, versatile cutting device with a slim blade and smooth edge (technical term for cutting edge). It is suitable for cutting onions and herbs and is also very helpful for chopping, cleaning and decorating fruit and vegetables. With its tapered blade it can also be used for spiking. Total length: 21.0 cm Blade length: 10.0 cm All-purpose knife The all-purpose knife from Culinaris is an all-round talent that is used for many small tasks in the kitchen. The knife is ideal for processing fruit and vegetables, but meat and fish are also no problem. Total length: 24.5 Blade length: 13.0 cm The blades of the Culinaris chef's knife series are made of German blade steel that is ground in a V-shape. The material is often used in kitchen knives and has a hardness of 56 - 58 HRC (Rockwell hardness). The blade steel ensures a balanced ratio of edge retention, rust inertness and good regrindability. The knives have an elegant and attractive design thanks to the triple-riveted handle made of black hard resin. The knives are delivered in an attractive anthracite-colored gift box. German blade steel 1.4116 (ensures a balanced ratio of edge retention, rust inertness and good re-sharpenability) V-cut (wedge cut) Rockwell hardness 56-58 HCR Handles made of black hard resin (Black G10), triple riveted Delivered in attractive anthracite-colored gift packaging

Wüsthof EPICURE - Steak knife set 4 pieces 12 cm - well-designed, extremely sharp, and equally suitable for both preparing food and dining. Blade length: 12 cm Set of 4 steak knives Blades are made of one piece of high-alloy X50CrMoV15 Synthetic handle, made of natural fibers and resin Long-lasting extreme sharpness, thanks to PEtec - WÜSTHOF’s Precision Edge Technology. Quality - Made in Germany / Solingen. Not dishwasher safe, wash by hand only. Wüsthof EPICURE BALANCE MEETS SUSTAINABILITY MEETS PRECISION. EPICURE is the cooking tool for all challenges to be mastered in the kitchen. It combines the virtues of two great philosophies: the efficiency and lightness of Japanese knives paired with German quality and safety. In so doing, EPICURE embodies a new type of knife - one that works with all cooking styles and sets the standard in function and performance. THE ESSENTIALS. IN PERFECTION. The development of EPICURE consistently follows our aspiration to leave out what is redundant and optimize what is necessary. The grip - designed to be a bit wider in the front third and tapered towards the back - is distinguished by the profile, which adapts to the natural contraction of the hand. This supports the ergonomically expansive grip position. Even when using a leading grip, EPICURE acts as a role model: the recontoured bolster effectively protects fingers from making contact with the sharp blade and imparts good control and safety. CONSIDERED TO THE SMALLEST DETAIL. Every blade is designed without exception to have a wider shape, exerting more weight on the item being cut and thereby working with much greater efficiency. At the same time, it guarantees you increased safety and noticeably improved ease of use: the wider contact surface offers not only better control when guiding the knife, but also helps to transport food to the pot quickly and cleanly. This is what makes EPICURE - great ideas, realized in perfect form.